|
The ReadySoft system operates using two control valves connected by a manifold system. A main control equipped with a six-digit easy-to-read LED display and interface buttons is used to program the system and send operating instructions to the secondary control. During operation, when the capacity of the on-line tank has been reached, the main control switches the tank in standby into operation and places the on-line tank into regeneration. After completing the regeneration the tank idles in the standby position until the on-line tank becomes exhausted. Prior to coming on-line, the control valve in standby performs an automatic fast rinse to drain, cleansing the tank and removing any residual salt solution. Service water flows through the manifold connection and is measured by a turbine flow meter in the outlet piping. During normal operation the main control displays the Capacity Remaining and Flow Rate for the tank on-line. While regeneration is initiated automatically when the resin bed is exhausted, the cycles of regeneration such as Backwash, Slow Rinse, and Fast Rinse can be adjusted to meet a wide variety of water challenges. In addition, salt settings and capacities may be programmed to fine-tune the operation and efficiency of the system. The soft water backwash feature eliminates hardness carryover and contamination of the resin bed with precipitated materials to assure clean and efficient operation. If a regeneration is required out of sequence, regeneration of one or both of the tanks can be initiated with a simple press of a button. For use in residential and light commercial applications, the ReadySoft system has numerous special features which make it the premier twin-tank system on the market today. Water usage information measured by the ReadySoft control system is stored in the main controller’s non-volatile memory and can be easily accessed. This allows for an in-depth look at the application through a wide variety of water usage and operational information including:
READYSOFT KEY FEATURES
Download a brochure (in PDF file format) Check out the optional Autotrol Turbulator for better iron removal - only $50.00! DIMENSIONS: ReadySoft-32: Main unit - two tanks each 9" diameter X 56.5 tall, brine tank - 15 X 17 X36 (275 lbs. salt capacity) ReadySoft-48: Main unit - two tanks each 10" diameter X 62.5 tall, brine tank - 15 X 17 X36 (275 lbs. salt capacity) ReadySoft-64: Main unit - two tanks each 12" diameter X 56.5 tall, brine tank - 15 X 17 X36 (275 lbs. salt capacity) SOFTENER SPECIFICATIONS: Water Softener Specifications INSTALLATION AND SERVICE MANUAL (PDF FILE FORMAT): Ready Soft Twin Alternating Manual - 3.9 MB |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The Autotrol
ReadySoft alternating system is a sophisticated twin-tank design
created for efficiency and convenience in a variety of applications.
Incorporating an intelligent control and water meter, the ReadySoft
system electronically monitors water usage and automatically indexes
the double-valve design between two tanks to provide an
uninterrupted supply of soft water. The ReadySoft system’s ease of
operation is equaled only by the uncommon reliability proven by the
Autotrol Series 255 valve with its simple design and reinforced
Noryl* construction.
